Building Elegance sliding shutters

Sliding shutters combine style and functionality

Building Elegance sliding shutters combine style and functionality – both inside and outside. Sliding shutters not only offer a futuristic look to the outside of the building, they also contribute to optimum efficiency for maximum indoor comfort. That is why sliding shutters form a total solution for the building.

Configurations

The sliding shutter can be manual or motorized, allowing the system to function in places where manual positioning is not possible. The sliding shutters can easily be connected to the building management system so that the sun protection function can be optimally set. Several configurations are possible. See examples below.

Standard fin choices

Below the available fins. Each fin gives the sliding shutter its own distinctive look. The maximum fin span depends on the wind load.

Standard choice of frames

The vertical profiles of the “Slimline” system have a slim appearance thanks to the slender profiles. The “Heavy Duty” system is provided with strong, rectangular profiles in order to allow a greater width and height for the sliding shutter.

Choice of standard guiding profiles

Our shutters slide between a standard top rail and two types of bottom rails. They are always suspended in the top rail by means of high-quality runners and can thermally expand at the location of the bottom rail, regardless of the type. The bottom of floor rail is available as standard as a T-profile or optional as a double box profile.

Graphics

The shutters have many different possibilities. It is possible to vary the infill, the frames and even the bottom rails. When choosing the frames, the occurring wind loads must be taken into account, as can be seen in the graphs below.

Slimline frame with fixed fins – Shutter height with Slimline 60×20 frame.

Heavy Duty frame with fixed fins – Shutter height with Slimline 60×40 frame.